If you are planning to skateboard in the rain and searching for information if skateboards can get wet, you have come to the right place.
In this article, we will discuss if skateboards can get wet, and what happens if your skateboard gets wet. We will also provide tips on how to keep your skateboard in good condition if it does get wet. So let's get started!
Can A Skateboard Get Wet?
The straight answer is yes; skateboards can most definitely get wet. But, that doesn't mean you should go ahead and ride your skateboard in the rain or through puddles.
The wood of a skateboard can start to warp and swell when it gets wet. Water can also damage the bearings on your skateboard wheels. It can cause the bearings to rust and make them less effective at spinning.
What Are The Consequences If The Skateboard Gets Wet？
Skateboards are not designed to get wet, and riding them in the rain or in puddles is not recommended. Water can cause the deck to warp, the trucks to rust, and the bearings to seize up.
If the skateboard gets wet, the lubricants in the bearing break down making it less effective. This will make the skateboard harder to ride and can also shorten its lifespan.
In the worst cases, when the fluid infiltrates the deck, it can cause waterlogged skateboards. These are difficult to ride and present a safety hazard.
The truck can also get rust from water exposure which will make the skateboard harder to ride. If that happens, the truck might require replacement.
Things To Do If Your Skateboard Gets Wet
Sometimes, you can't help but ride your skateboard in the rain or drop it in a puddle. If this happens, you can do a few things to try and salvage your skateboard.
- Look for any water that might be pooling on the deck and try to remove it with a towel.
- Wipe down the deck with a dry cloth as soon as possible.
- Remove the wheels and bearings from the skateboard and clean them with a dry cloth. If there is any water inside the bearings, try to remove it with a paper towel.
- Re-lubricate the bearings after cleaning them. This will help to protect them from rust. You can buy a WD-40 or a silicone spray lubricant from your local hardware store.
- Dry off the trucks with a towel and then use a rag to wipe down any water on them.
- Let the skateboard dry in a warm, dry place. Do not put it in direct sunlight or heat, as this can cause the deck to warp.
- Wait 24-48 hours to ensure the skateboard is completely dry before riding it again.
- Assemble the skateboard and check that all the parts are working.
Signs Of Waterlogged Skateboards
You should not ride a waterlogged skateboard as it is a safety hazard. If you think that you have a waterlogged skateboard, look for these signs:
Soft and spongy deck
If the deck feels soft and spongy, water has seeped into the wood and is causing it to swell.
If the paint on the deck is bubbling or peeling, it means that water has gotten under the paint and is causing it to separate from the wood.
Check for water pooling on the deck or underneath it, this is a sign that the wood has absorbed water and is starting to warp.
Heavier than usual
Try to use your skateboard and perform some basic tricks. If the skateboard feels heavier than usual, the wood has absorbed water and is now heavier.
Dull or muted sound
Gentle drops the skateboard on the ground and listens to the sound it makes. If the sound is dull or muted, this means that the wood has absorbed water and is no longer as hard as it used to be.
If your skateboard shows any of these signs, do not ride it, as it can be a safety hazard. Waterlogged skateboards can break and can cause you to fall and injure yourself.
How To Fix A Waterlogged Skateboard
If your skateboard has been soaked in water, it is likely waterlogged. This means that the wood of the deck has absorbed water and swollen, making it almost impossible to ride.
Unfortunately, there is no real way to fix a waterlogged skateboard, and you will most likely need to buy a new one. It is because the deck's wood has expanded and will not return to its original shape.
It is best to avoid riding a waterlogged skateboard as it can be a safety hazard. The deck could break while you are riding, causing you to fall and injuring yourself.
How To Prevent Skateboard Trucks From Oxidation？
The best way to prevent oxidation is to keep your skateboard clean and dry. Wipe down the trucks after every ride with a dry rag. If they start to show signs of rust, use a WD-40 or skate lubricants to protect them.
You should also avoid riding in the rain or through puddles as this can cause the trucks to rust. If you do get your skateboard wet, make sure to dry it off as soon as possible.
How To Remove Rust From Skateboards?
If there are signs of rust on your skateboard, here are the steps to remove it.
- Use a wire brush to scrape off any loose rust.
- Apply a rust dissolver with a clean cloth and let it sit for 10-15 minutes.
- Wipe off the rust dissolver with a clean cloth.
- Repeat steps 2-4 until the rust is gone.
- Use a clean cloth to wipe down the area and remove any residue.
- Allow the skateboard to dry before riding it again.
The steps above should help to remove the rust from your skateboard. But, if the rust is severe, it might be best to replace the truck rather than try and remove the rust.
Skateboarding On Wet Roads
The excitement of skateboarding can sometimes make us forget the dangers involved. One of the most dangerous things you can do on a skateboard is to ride on wet roads.
Wet roads are slippery and can cause you to lose control of your skateboard and fall. It is best to avoid riding on wet roads as much as possible, especially if you are a beginner.
If you must ride on wet roads, go slowly and be extra careful. It is also a good idea to wear protective gear such as a helmet and elbow pads.
Other than a health hazard, your skateboard can also become damaged if you ride on wet roads. As mentioned above, wet roads are slippery and can cause your skateboard to skid. This can damage the trucks and wheels and even warp the wood of the deck.
So, the next time you are tempted to skate on wet roads, remember the risks involved and think twice before doing it. It is best to wait for the roads to dry before going skateboarding.
Skateboarding is a great way to have fun and stay active. Yet, it is important to be aware of the dangers involved.
A skateboard can get wet and waterlogged, making it difficult to ride and a safety hazard. If your skateboard gets wet, make sure to dry it off as soon as possible.
By reading this article, you should now know if a skateboard can get wet and what to do if it gets wet. And how to do simple repairs on your skateboard.
Whether you're getting started or you've been skating for a while, it's always good to brush up on the basics. Stay safe and have fun!
Frequently Asked Questions
Is there a way to get the 'pop' back in a waterlogged skateboard deck?
As we mentioned above, there is no real way to fix a waterlogged skateboard, and you will most likely need to buy a new one. It can be a safety hazard as the deck could break while you are riding.
Is it a bad idea to skateboard on wet cement?
Yes, it is a bad idea to skateboard on wet cement. Wet cement is very slippery and can cause you to lose control of your skateboard and fall. If you must ride on wet cement, be extra careful.
My skateboard got wet, and now the wheels won't spin. What should I do?
If your skateboard's wheels don't spin after it gets wet, there are a few things you can try to fix the problem.
First, use a dry rag to wipe down the wheels and remove any water or debris. If the wheels are still not spinning, you can try to apply a small amount of WD-40 to the center of the wheel. Finally, if the wheels still aren't spinning, you might need to replace them.